Skip to content
Serving Jupiter and nearby cities Mon–Fri: 8 AM–8 PM · Requests accepted 24/7 · (561) 292-1157

Painting Contractor Serving Hobe Sound, FL

The short answer

ClearCoat Painting serves Hobe Sound in Martin County, about 10 miles north of Jupiter. We paint interiors and exteriors, refinish cabinets, stain decks and fences, pressure wash and repair drywall, using prep and coatings chosen for salt air, UV and humidity.

Hobe Sound is just across the county line in Martin County, about 10 miles north of ClearCoat Painting's base in Jupiter. That short drive makes it one of the easiest places for us to work outside Palm Beach County, and Hobe Sound homes keep us busy for a clear reason: between salt-laden breezes off the water, relentless summer sun and months of heavy humidity, paint simply works harder here. We handle exterior and interior repaints, wood and metal trim, cabinets, decks, fences and the washing and repair that make any coating last. Here is what homeowners in this unincorporated community should know before planning a paint project.

Salt Air Changes the Prep

Homes within reach of ocean and Intracoastal breezes collect a fine film of salt on every exterior surface. You cannot always see it, but paint applied over it bonds poorly, and the salt keeps drawing moisture toward the surface long after the job is done. That is why every Hobe Sound exterior we paint begins with a fresh-water wash, not just a quick rinse, followed by a mildew treatment on shaded areas.

Salt also speeds up corrosion. Iron railings, light fixtures, hinges and fasteners rust faster near the coast, and that rust bleeds through paint as orange streaks. We remove loose rust down to sound metal, prime with a rust-inhibiting product, and finish with an enamel built for exterior exposure. Galvanized and aluminum surfaces get a primer made specifically for those metals, since standard primers can peel off them.

Wood, Stucco and Everything In Between

Hobe Sound has a mix of construction, from concrete-block homes with stucco to houses with wood siding, wood trim and covered porches. Each material asks for something different.

Stucco and block need a masonry primer on any bare or chalking areas and a breathable, mildew-resistant topcoat. If the walls show a network of fine cracks, an elastomeric coating may be the better answer because it flexes rather than splitting. Wood needs scraping and sanding to a firm edge, replacement of any soft or rotted sections, and primer on bare spots before two coats of exterior paint. Doors and shutters that face the afternoon sun often need a more frequent refresh than the walls around them.

  • Fresh-water washing to remove salt and dirt film
  • Mildew treatment on eaves, soffits and north-facing walls
  • Rust removal and inhibiting primer on metal
  • Rot repair and spot priming on wood trim and fascia
  • Crack bridging with flexible patch or elastomeric coating
  • Two finish coats as our standard on exterior walls

Decks, Fences and Outdoor Living Areas

Outdoor wood in coastal Martin County goes gray quickly under strong UV and stays damp for long stretches in summer. Deck and fence staining protects the wood while letting the grain show. We wash and brighten the boards, let them dry thoroughly, and then apply a penetrating or semi-transparent stain depending on the wood's condition and the look you want. Pool decks, patios and paver walkways can be pressure washed at the same visit to remove algae and the slippery film that builds up in shady corners.

Interiors That Feel New Again

Inside, the most frequent Hobe Sound requests we see are whole-house repaints before a sale or after a purchase, kitchen cabinet refinishing, and removal of dated popcorn ceilings. Interior work is not weather-dependent, so it can be scheduled any time of year. We protect floors and furnishings, repair drywall dents and cracks, prime water-stained areas with a stain blocker, and leave crisp lines along trim and baseboards.

Scheduling With the Seasons

The drier stretch from November into April gives the most predictable painting weather for exteriors. During the wet season, roughly May through October, we start early and plan coating so it sets up before the typical afternoon thunderstorms. Since hurricane season runs from June 1 to November 30, many Hobe Sound owners like to have cracks sealed and peeling areas repaired ahead of the peak months.

We also work regularly in nearby Jupiter Island, Jupiter Inlet Colony, Juno Beach, Palm Beach Gardens and Lake Park, which makes it simple to coordinate projects across more than one property.

Nearby areas

What to expect

How a visit goes

  1. Honest Assessments

    If a surface needs repair rather than paint, or if a cheaper option will do the job, we say so up front.

  2. Respect for Your Home

    We cover floors, move and wrap furniture, protect landscaping and clean up before we leave each day.

  3. Clear Communication

    You know the schedule, the products we plan to use and what to expect at each stage, including rain delays.

FAQ

Common questions

Don’t see your question? Call (561) 292-1157 and we’ll talk it through.

Do you work in Martin County?

Yes. Hobe Sound is about 10 miles north of our Jupiter base, and we serve it along with nearby Jupiter Island.

Why does my exterior paint fail faster near the water?

Salt film, constant humidity and strong UV all attack paint. Washing off salt, priming properly and using mildew-resistant coatings slows that wear.

Can you fix rust stains on my walls?

Yes. We find the metal source, remove the rust, prime it with an inhibiting primer and repaint so the stain does not return.

Should I stain or paint my wood fence?

Stain soaks into the wood and wears gradually, while paint forms a film that can peel. Many owners in this climate prefer stain for fences and decks.

Do you paint homes with wood siding?

Yes. We scrape, sand, repair soft spots, spot prime and apply exterior paint suited to wood in a humid coastal climate.

Ready to Talk About Your Project?

Tell us what you want painted and a little about the home. We will set up a visit, look at the surfaces and give you a written plan and quote.

Call (561) 292-1157 Request Service