The short answer
ClearCoat Painting serves Port Salerno, about 15 miles north of Jupiter in Martin County. We fix and repaint weathered coastal exteriors, stain wood, pressure wash, and handle interiors, cabinets and drywall.
Port Salerno is an unincorporated community in Martin County, about 15 miles north of ClearCoat Painting's home base in Jupiter. Houses near the water here face the same pressures as anywhere on the Treasure Coast: damp mornings, strong midday sun, salt in the air and summer storms that push rain sideways into every gap. Instead of a generic sales pitch, this page walks through the problems we see most often on local homes and how we deal with each one, along with the interior and specialty services we offer when you are ready to update the inside too.
Problem one: peeling around windows, doors and trim
Peeling almost always traces back to water. Failed caulk around a window frame lets rain in behind the paint, and the next hot afternoon pushes that moisture out, lifting the film. Painting over it only hides the problem for a season.
We scrape back to sound material, let the area dry, replace old caulk with a flexible exterior sealant, spot prime bare wood or stucco and then finish. If wood trim has gone soft, we show it to you before deciding together whether to repair or replace that piece. Trim usually gets a satin or semi-gloss enamel, which sheds water better than a flat finish.
Problem two: dark streaks and mildew
Shaded walls, the undersides of eaves and areas near sprinklers stay damp, and in our humidity mildew moves in quickly. It looks like dirt but comes back after a simple rinse. The right sequence is a cleaning solution that kills the growth, a thorough pressure wash, full drying time and then a mildew-resistant primer and topcoat.
Trimming plants back from the walls and pointing sprinkler heads away from the house helps the new finish stay clean longer. We will point out those spots during the walk-through.
Problem three: faded color and chalky walls
Under strong UV, the binder in paint breaks down and leaves a powdery surface that rubs off on your hand. New paint will not stick well to chalk, so the walls must be washed until the residue is gone, and heavily chalked areas often need a bonding primer.
When choosing the new color, it helps to know that deep, saturated shades on sunny elevations fade sooner. We can suggest UV-stable alternatives that keep the look you want while aging more gracefully. Sheen matters as well: a low-sheen finish hides surface flaws on textured stucco, while a slightly higher sheen on trim resists dirt and rinses clean after storms.
Problem four: cracks in block and stucco
Hairline cracks are normal in stucco over concrete block, but in storm season they become entry points for wind-driven rain. We open larger cracks, fill them with a flexible patch, texture the repair to blend in and prime it. For walls with many fine cracks, an elastomeric coating builds a thick, elastic layer that bridges them and keeps water out far better than ordinary exterior paint.
- Crack repair with flexible patching compound
- Texture matching so repairs blend into the wall
- Elastomeric coatings for weathered stucco
- Rust-inhibiting primer on metal railings and fasteners
Inside the home and around the yard
Once the exterior is sound, many owners turn to the interior. We repaint rooms and ceilings, refinish cabinets with durable enamel, refresh baseboards and doors, repair drywall and remove popcorn ceilings. Outside, we stain decks, docks walkways and fences with penetrating products that protect against sun and moisture, and we pressure wash driveways and patios. Small commercial properties are welcome too, with scheduling planned around business hours.
Interior work follows a steady routine. Furniture is moved to the center of the room and covered, floors are masked, outlets and switch plates come off, and patches are sanded and primed before color goes on. A cabinet project takes a bit longer because each door is sprayed or brushed in a clean area and allowed to cure before it goes back on the hinges. At the end of each day, we sweep up and leave the house ready for you to use that evening.
Best months for each kind of work
The stretch from November into April is drier and the easiest time for exterior painting and staining. May through October brings heat, humidity and frequent afternoon thunderstorms, so outdoor work shifts to the morning. Because hurricane season lasts from June 1 to November 30, sealing cracks and refreshing caulk before summer is a smart move. Interior painting works well in any month. We also serve Jupiter Island, Jupiter Inlet Colony, Juno Beach and Palm Beach Gardens.